58
Port Forwarding
You can setup your port forwarding rules here, this will allow you to connect to a specific device behind the NAT firewall.
Enable Port Forwarding: Use this feature to Enable Port Forwarding on the device.
Local IP Address: Internal IP address of the Router.
Local Port Start: Enter the Port Number
Local Port End: Enter the Port Number
Protocol: Choose a Protocol ( BOTH , UDP,TCP )
Remote IP address: Enter a remote IP address if you want an individual device to connect, if not leave it blank.
Remote Port Start: Enter Port Number.
Remote Port End: Enter Port Number.
Comment: Enter a name or tag.
To Next Page
Loading...
