29
WAN Setting
Connection name: Choose a WAN from the drop-down menu.
Enable: Choose to Enable/Disable the profile.
WAN Access Type: Select a WAN type such as PPPOE/DHCP/Static.
User Name: Enter the ISP username if using PPPOE.
Password: Enter the ISP password if using PPPOE.
Service Name: Leave blank or give it a name.
MTU: Please ensure this is set to the value of
1492.
Connection Type: You can set the connection
to Continuous/Connect on demand or
manual.
Clone MAC Address: This option is used to
Clone the Mac address of a device.
Enable VLAN: Choose whether to
Enable/Disable the VLAN.
To Next Page
Loading...
