34
IPv6 Wan Setting
Here you can configure the parameters of IPv6 Wan settings.
Enable IPv6: Enable/Disable IPv6
Origin Type: This can be set to AUTO/STATIC/6RD
Address Mode: You can set this to a Stateful/Stateless address
PD Enable: Enable or Disable the PD (Prefix Delegation)
Enable wan ds lite: Enable/Disable DS-Lite (Dual-Stack Lite) Allows the user to utilize IPV4 to access Internet via IPv6
Enable MLD Proxy: Enable/Disable Multicast Listener Discovery (used to discover Multicast Listeners)
To Next Page
Loading...
