D-Link DIR-830L

36D-Link DIR-830L User Manual
Section 3 - Conguration
Static IPv6
Enable or disable a link-local address.
If you disabled Use Link-Local Address, enter the address
supplied by your ISP.
If you disabled Use Link-Local Address, enter the subnet prex
length supplied by your ISP.
Enter the default gateway for your IPv6 connection.
Enter the primary DNS server address.
Enter the secondary DNS server address.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN link-local address.
Click to enable the Automatic IPv6 Address Assignment feature.
Select SLAAC + RDNSS or SLAAC + Stateless DHCP, Stateful
(DHCPv6).
Enter the IPv6 address lifetime (in minutes).
Click Save when you are done.
Use Link-Local Address:
IPv6 Address:
Subnet Prex Length:
Default Gateway:
Primary DNS Server:
Secondary DNS Server:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable Automatic IPv6
Address Assignment:
Auto Conguration
Type:
Router Advertisement
Lifetime:
Select Static IP if your IPv6 information is provided by your Internet service provider (ISP).