D-Link DIR-830L

62D-Link DIR-830L User Manual
Section 3 - Conguration
Enter a name for the route.
This is the IP address of the router used to reach the specied
destination.
Enter the IPv6 address prex length of the packets that will take this
route.
Enter the metric value for this rule here.
Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click Apply when you are done.
Name:
DestNetwork:
PrexLen:
Metric:
Interface:
IPv6
If you wish to remove a route, click on its trash can icon in the Delete column. If you
wish to edit a route, click on its pencil icon in the Edit column. If you wish to create
a new route, click the Add Route button.
Click Save when you are done.
After you click Add Route, or if you click on the pencil icon to edit a route, you will
see the screen to the right.
To congure IPv6 routes, from the Static Routes page click IPv6. To return to the main IPv4 static routes page, click IPv4.