DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Configuring via Web-based Interface
IPsec
On the Advanced / IPsec page, you can configure VPN tunnels based on IPsec protocol.
IPsec is a protocol suite for securing IP communications.
Figure 124. The Advanced / IPsec page.
To allow IPsec tunnels, move the Enable switch to the right. Upon that the Tunnels and Status
sections are displayed on the page.
If you want to log all data on IPsec tunnel debugging, move the Debug switch to the right.
In the Status section, the current state of an existing tunnel is displayed.
Page 163 of 209
To Next Page
Loading...
