DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Configuring via Web-based Interface
In order to let wired PCs connected to your device access the network of a wireless router, on the
Device mode page, from the Connection method list, select the Wi-Fi value. Then from the
Work mode list select the Client value. In this mode you can change the LAN IP address, connect
your device to another access point, and set your own password for access to the web-based
interface of the device.
Figure 37. Selecting an operation mode. The Client mode.
Page 48 of 209
To Next Page
Loading...
