DIR-841 AC1200 Wave 2 MU-MIMO Wi-Fi Router
with Gigabit WAN Port
User Manual
Configuring via Web-based Interface
Figure 66. The page for creating a new Static IPv4 connection. The Authorization via 802.1x Protocol
section.
Parameter Description
Authorization via 802.1x Protocol
Enable authorization
via 802.1x protocol
Move the switch to the right to allow authorization in the ISP's
network via the 802.1x protocol.
Authentication
method
Select a needed authentication method from the drop-down list.
Username
Enter the username provided by your ISP.
Password
Enter the password provided by your ISP.
When all needed settings are configured, click the APPLY button.
Page 79 of 209
To Next Page
Loading...
