To access the configuration utility, open a web-browser such as
Internet Explorer and enter http://dlinkrouter.local./ or you may
also connect by typing the IP address of the router (by default
this is http://192.168.0.1) in the address bar
Enter your password. If you previously followed the setup wizard,
please use the admin password you entered during the wizard.
Otherwise, leave the password blank. Click Login to proceed
Note: If you cannot remember your password and cannot log in,
press the reset button on the bottom of the device for longer
than 10 seconds to restore the router to its default settings.
The router’s home page will open displaying its current
connection status.
The bar at the top of the page has quick access to Settings and
Management functions. You may quickly jump back Home at any
time.
Note: The system will automatically log out after a period of
inactivity
To Next Page
Loading...
