D-Link DIR-846 - Static Routing Configuration

D-Link DIR-846 User Manual
- 33 -
Network settings
Static routing
The Static Routes section allows you to define custom routes to
control how data traffic is moved around your network.
On the top of the menu bar, click More click network settings
then click static routing.
If you wish to create a new rule, click the + button. Click Save when
you are done. If you edit or create a rule, the following options will
appear:
Destination Network: Enter the IP address of packets that will take
this route.
IP sub net mask: Enter the net mask of the route.
Default gateway: Enter your next hop gateway to be taken if this
route is used.
Click Apply when you are done.