D-Link DIR-846 - LAN Settings Configuration

D-Link DIR-846 User Manual
- 21 -
LAN settings
This section will allow you to change the local network settings of
the router and to configure the DHCP settings. In the Settings
menu on the bar on the top of the page, click More. Click
Network Settings... to expand the list and see all of the options.
MAC address: Display the router’s LAN mac address
LAN IP Address: Enter the IP address of the LAN port. The default
IP address is 192.168.0.1.
If you change the IP address, once you click Save, you will need to
enter the new IP address in your browser to get back into the
configuration utility.
DHCP server: Turn off or turn on the router’s DHCP server.
DHCP IP Address Range: Enter the starting and ending IP addresses
for the DHCP server’s IP assignment.
Lease time: Choose your DHCP server lease time from the
drop-down menu.
DHCP user list: Display the DHCP user’s information and the active
time.