D-Link DIR-846 - TR069 CPE Configuration

D-Link DIR-846 User Manual
- 48 -
TR069
This page is used to configure the TR-069 CPE. Here you may change
The setting for the ACS’s parameters.
Note: If you enable TR069 ,please turn off DMZ first.
On the top of the menu bar, click More click System management
then click TR069.... to expand the list and see all of the options.
ACS section
URL: Enter the ACS service’s URP or the IP address.
User Name: Enter the ACS authentication User Name.
Password: Enter the ACS authentication Password.
Periodic Inform Enable: Enable or disable the periodic inform.
Periodic inform Interval: Enter the periodic inform interval.