13D-Link DIR-880L User Manual
Section 2 - Installation
5. Plug the power adapter into your router and connect to an available power outlet or surge protector. If the
Power LED does not light up, press the Power button on the back of the router.
6. After the router has powered up, verify that the Power (blue) and Internet (blue or orange) LEDs are both lit.
Proceed with router conguration.
Note: This unit is to be used with power supply model WA-36C12R.
1 2 3 4 INTERNET USB
RESET
POWER
ON/OFF
Modem
DIR-880L
Computer
To Next Page
Loading...
