To Next PageTo Next Page
Need help?Do you have a question about the D-Link DMS-105 and is the answer not in the manual?
General| Switch type | Unmanaged |
|---|---|
| Switch layer | L2 |
| Quality of Service (QoS) support | Yes |
| Installed SFP modules quantity | - |
| Basic switching RJ-45 Ethernet ports type | 2.5G Ethernet (100/1000/2500) |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| Forwarding rate | 18.6 Mpps |
| MAC address table | 4000 entries |
| Packet buffer memory | 8.1 MB |
| Product color | Black |
| LED indicators | Activity, Link, Power |
| Power source | DC |
| Input current | 1 A |
| DC input voltage | 12 V |
| Power consumption (typical) | 4.918 W |
| Heat dissipation | 16.78 BTU/h |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Mean time between failures (MTBF) | 765190 h |
| Networking standards | IEEE 802.1p, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x |
| Sustainability certificates | BSMI, CE, Low Voltage Directive (LVD), RoHS |
Weight and Dimensions| Depth | 82 mm |
|---|---|
| Width | 100.5 mm |
| Height | 28 mm |
| Weight | 238.6 g |
Step-by-step instructions for setting up the switch.
Details on LED indicators for port connection speed and activity.
Common issues encountered during setup and configuration.
