D-Link DMS-105 User Manual

3
ENGLISH
TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
1. WHAT TO DO IF THE POWER LED IS NOT LIT UP?
Check if the power adapter is properly connected to a wall socket and the back of the switch.
2. WHAT TO DO IF A CONNECTED DEVICE IS NOT DETECTED?
First check if the Port LED is ashing. If the Port LED is not illuminated, try connecting the device
using a di󰀨erent LAN cable.
TECHNICAL SUPPORT

D-Link DMS-105 Specifications

General

Switch type	Unmanaged
Switch layer	L2
Quality of Service (QoS) support	Yes
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	2.5G Ethernet (100/1000/2500)
Basic switching RJ-45 Ethernet ports quantity	5
Forwarding rate	18.6 Mpps
MAC address table	4000 entries
Packet buffer memory	8.1 MB
Product color	Black
LED indicators	Activity, Link, Power
Power source	DC
Input current	1 A
DC input voltage	12 V
Power consumption (typical)	4.918 W
Heat dissipation	16.78 BTU/h
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Mean time between failures (MTBF)	765190 h
Networking standards	IEEE 802.1p, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x
Sustainability certificates	BSMI, CE, Low Voltage Directive (LVD), RoHS

Weight and Dimensions

Depth	82 mm
Width	100.5 mm
Height	28 mm
Weight	238.6 g