Do you have a question about the D-Link DMS-108 and is the answer not in the manual?
Switch type | Unmanaged |
---|---|
Switch layer | L2 |
Quality of Service (QoS) support | Yes |
Installed SFP modules quantity | 0 |
Basic switching RJ-45 Ethernet ports type | 2.5G Ethernet (100/1000/2500) |
Basic switching RJ-45 Ethernet ports quantity | 8 |
Forwarding rate | 29.76 Mpps |
MAC address table | 4000 entries |
Packet buffer memory | 8.1 MB |
Product color | Black |
Rack mounting | - |
LED indicators | Activity, Link, Power |
Power source | DC |
Input current | 1 A |
DC input voltage | 12 V |
Power consumption (typical) | 8.586 W |
Heat dissipation | 29.3 BTU/h |
Storage temperature (T-T) | -10 - 70 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 5 - 90 % |
Operating relative humidity (H-H) | 10 - 90 % |
Mean time between failures (MTBF) | 724033.96 h |
10G support | No |
Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x |
Sustainability certificates | BSMI, CE, Low Voltage Directive (LVD), RoHS |
Depth | 82 mm |
---|---|
Width | 145 mm |
Height | 28 mm |
Weight | 343 g |
Details on how to physically install the device, including desktop and wall mounting options.
Step-by-step instructions for powering and connecting the switch to a network.
Explains the meaning of different LED colors and states for port connection status.
Addresses common issues encountered during initial setup and configuration of the device.
Information regarding the product's compliance with CE standards and potential radio interference.
Details on FCC compliance for Class B digital devices and measures to mitigate interference.
Compliance statement for digital apparatus with Canadian ICES-003 standards.
Statement regarding Class B digital equipment used in a home environment and potential interference.
Information on D-Link's commitment to environmental friendliness and eco-friendly product practices.