D-Link DNS-323 - Network Storage Enclosure NAS Server User Manual

25D-Link DNS-323 User Manual
Section 3 - Configuration
LAN
The Local Area Network settings for the DNS-323 are configured on the LAN page.
Link Speed
DHCP Client
Static IP
The LAN Link Speed is set to Auto
by default, but can be manually set
to 100Mbps or 1000Mbps.
Selecting DHCP Client will cause
the DNS-323 to obtain an IP address
from the local DHCP server.
Selecting Static IP requires you to
assign the IP information for the
DNS-323 manually.
Click the Enable radio button next
to Status to enable jumbo frames.
Jumbo Frame
Settings

D-Link DNS-323 - Network Storage Enclosure NAS Server Specifications

General

Device Type	NAS server
Number of Bays	2
Weight	1.5 kg
Network Architecture	Gigabit Ethernet
Supported Drive Types	3.5" SATA I/II
RAID Levels	JBOD, RAID 0, RAID 1
Supported Protocols	HTTP, FTP, SMB, NFS
Max Internal Capacity	4 TB (2 x 2 TB)
Processor	Marvell 88F5182
Memory	64 MB
Power Consumption	25 W (operational)
Operating Temperature	0 to 40°C (32 to 104°F)
Interfaces	1 x 10/100/1000 Gigabit Ethernet, 1 x USB 2.0
Data Transfer Rate	1 Gbps