D-Link DNS-346 USER’S MANUAL
Page 59 of 85
RAID Status Type
RAID Status (Normal):
RAID Status (Degraded):
RAID Status (Crashed):
RAID Status (Rebuilding):
An alert will be sent when the RAID status becomes NORMAL after
being rebuilt from DEGRADED mode.
An alert will be sent when the RAID status becomes DEGRADED
after a disk has been removed or has failed.
An alert will be sent when the RAID volume has CRASHED (RAID
status is listed as CRASHED). The CRASHED volume occurs when
the array does not have enough working disks to support the type
of RAID implementation.
An alert will be sent when the RAID array is being rebuilt after a
failed disk has been replaced.
Volume Operations Type
Volume Created:
Volume Removed:
Volume Resized:
An alert will be sent if a new volume is created on the DNS-346.
An alert will be sent if a volume is removed on the DNS-346.
An alert will be sent if the size of the volume has been changed on
the DNS-346.
To Next Page
Loading...
