D-Link DP-301P+ Quick Installation Guide

6
Setting up your DP-301P+ for network
printing in Windows XP (continued)
Select “Create a new port.”
At the pull-down menu,
highlight “Standard TCP/IP
Port.”
Click Next
Click Next
Select “Local Printer.”
Click Next
Please make sure to deselect
Automatically detect and
install my Plug an Play
printer.

D-Link DP-301P+ Specifications

General

Networking standards	-
Ethernet LAN data rates	10, 100 Mbit/s
Network connection type	Ethernet LAN
Copper ethernet cabling technology	100BASE-TX, 10BASE-T
Supported network protocols	TCP/IP, NetBEUI, AppleTalk, LPR, SMB, IPP
DC-in jack	Yes
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Flash memory	2 MB
Internal memory	8 MB
Internal	No
Product color	Gray
LED indicators	Power
Windows operating systems supported	Windows 2000, Windows 2000 Professional, Windows 95, Windows 98, Windows 98SE, Windows ME, Windows NT, Windows XP Home, Windows XP Home x64, Windows XP Professional
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Safety	UL, LVD
Certification	FCC B, CE B, C-Tick
Cabling technology	10/100Base-T(X)
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	52.6 mm
Width	85.6 mm
Height	25.9 mm