Need help?Do you have a question about the D-Link DPR-1061 and is the answer not in the manual?
General| Networking standards | IEEE 802.3 |
|---|---|
| Network connection type | Ethernet LAN |
| Supported network protocols | TCP/IP, NetBEUI, IPP |
| Interface | 10/100Base-TX |
| Dimensions (WxDxH) | 192.5 x 118.4 x 31 mm |
| Power requirements | 5.0V DC/2.5A |
| Compatible operating systems | Windows Vista/XP/2000/NT 4/ME/98SE/95 Apple Mac OS 9.x - MAC OS X 10.4.x Linux UNI X lpr/lpd (HP-UX, SunOS, Solaris, SCO, UnixWare, IBM AIX) NetWare 5.x |
| DC-in jack | Yes |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN (RJ-45) ports | 1 |
| Storage temperature (T-T) | -25 - 55 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Certification | FCC, CE, C-Tick, IC, CSA |
Weight and Dimensions| Depth | 118.4 mm |
|---|---|
| Width | 192.5 mm |
| Height | 30.1 mm |
| Weight | 292 g |
Lists items included in the product box.
Specifies the hardware and software needed to use the device.
Describes the physical printer ports on the device.
Explains the meaning of the status lights on the device.
Step-by-step guide to install and power up the print server.
Details the automatic self-test process upon power-up.
Instructions for initiating the software installation from CD.
Comprehensive guide to install the PS Software suite.
Instructions for using the PS-Link utility for setup.
Guide for configuring printers with PS-Wizard.
Specific steps for installing HP printers.
Accessing the device's web interface for management.
Configuring network parameters like IP address.
Installing printer drivers via the web interface.
Advanced network configuration options.
Changing the device's access password.
Updating the device's firmware.
Viewing current device and network status.
How to print text files with correct line endings.
Configuration steps for SCO Unix.
Setup for Solaris printing.
Adding printers in Red Hat Linux.
Steps to add a printer on Mac OS X.
Configuration for IP-based printers on Mac.
To Next Page
