26
Installing and Using MFP/GDI Printer
This section will introduce you how to start the initial installation of various MFP/GDI
printer in the use of the printer manufacturer’s CD-ROM. Likewise, how to use
MFP/GDI printer through the PS-Link utility of the MFP Server after the printer
manufacturer’s driver is installed on your computer.
For PC with the MFP/GDI printer driver installed:
If your computer was already installed with the MFP/ GDI printer driver, you can just
click [Link] button of PS-Link to complete the connection between the printer and
your computer.
For PC without the MFP/GDI printer driver installed:
If your computer never had initial installation of the MFP/GDI printer driver, you may
follow the following procedure to achieve it.
1. Insert the manufacturer’s CD-ROM into your computer’s CD-ROM driver to initiate
Auto-Run program.
2. Following the instructions of the manufacturer’s CD-ROM to install MFP driver and
other media software until you are requested to attach the printer’s USB cable to
your computer.
3. When you are requested to do physical connection between the printer and your
computer, the following installation steps will be different depending on the
manufacturer brand. Here lists illustrations for several printers of major
manufacturers:
To Next Page
Loading...
