D-Link DPH-150S - General Settings; Forward Settings; Function Keys

31
/
68
DHCP Option
Option Value
The equipment supports configuration from Option 43, Option 66, or a
Custom DHCP option. It may also be disabled.
Custom Option
Value
Custom option number. Must be from 128 to 254.
SIP Plug and Play (PnP)
Enable SIP PnP
If this is enabled, the equipment will send SIP SUBSCRIBE messages to a
multicast address when it boots up. Any SIP server understanding that
message will reply with a SIP NOTIFY message containing the Auto
Provisioning Server URL where the phones can request their configuration.
Server Address PnP Server Address
Server Port PnP Server Port
Transportation
Protocol
PnP Transfer protocol – UDP or TCP
Update Interval Interval time for querying PnP server. Default is 1 hour.
Static Provisioning Server
Server Address
Set FTP/TFTP/HTTP server IP address for auto update. The address can be an
IP address or Domain name with subdirectory.
Configuration File
Name
Specify configuration file name. The equipment will use its MAC ID as the
config file name if this is blank.
Protocol Type Specify the Protocol type FTP, TFTP or HTTP.
Update Interval Specify the update interval time. Default is 1 hour.
Update Mode
1. Disable – no update
2. Update after reboot – update only after reboot.
3. Update at time interval – update at periodic update interval
TR069
Enable TR069 Enable/Disable TR069 configuration
ACS Server Type Select Common or CTC ACS Server Type.
ACS Server URL ACS Server URL.
ACS User User name for ACS.
ACS Password ACS Password.
TR069 Auto Login Enable/Disable TR069 Auto Login.
INFORM Sending
Period
Time between transmissions of “Inform” Unit is seconds.