SIP Log Level
Set the level of SIP log.
Network Packets Capture
Capture a packet stream from the equipment. This is normally used to troubleshoot problems.
Reboot Phone
Some configuration modifications require a reboot to become effective. Clicking the Reboot button
will lead to reboot immediately.
Note: Be sure to save the configuration before rebooting.
8.3.2 Network
8.3.2.1 Basic
Field Name Explanation
Network Status
IP The current IP address of the equipment
Subnet mask The current Subnet Mask
Default gateway The current Gateway IP address
MAC The MAC address of the equipment
MAC
Timestamp
Get the MAC address of time.
Settings
Select the appropriate network mode. The equipment supports three network modes:
Static IP
Network parameters must be entered manually and will not change. All
parameters are provided by the ISP.
DHCP Network parameters are provided automatically by a DHCP server.
PPPoE Account and Password must be input manually. These are provided by your ISP.
If Static IP is chosen, the screen below will appear. Enter values provided by the ISP.
To Next Page
Loading...
