83
The following procedures describe each transfer type in detail.
Phone A, phone B, phone C
Sending a call to another phone (attended transfer)
To perform attended transfers:
1. A, as a caller, to call B, A and B in talking, A want to transfer active to C, A press the function key [Flash] button, then A hear a dial tone.
2. A Dial the number to C. it can be pressed [#] or time out 5 seconds when A finish inputting the call number to dial, A can hear ring back if C is available.
3. If A want to transfer the call to C, press the function key [Transfer] button, then A can press [Transfer] to transfer the call to C, and A will hear busy tone, B
and C is in talking; If A do not want to transfer the call to C, press the function key [Flash] button again to return to original line B to continue talking with A.
4. Hang up A’s handset.
Sending a call to another phone (Unattended Transfer)
To perform unattended transfers.
1. With the call active and one other line available, press the function key[Flash].
2. Dial the number to which you want to transfer the call.
The call is sent to the extension or number you dialed.
3. Hang up your handset.
To Next Page
Loading...
