D-Link DPR-1061

4
EXTERNAL FEATURES
Port Connectors
The DPR-1061’s three printer ports are located on its rear panel. Two USB and one
parallel ports are labeled USB1, USB2, and LPT. These printer ports can be independently
congured using the Web Conguration Interface. The Print Server’s Web conguration
permits users to congure settings through the web browser.
Default IP Address of DPR-1061 is set as automatically getting from DHCP server or
Router which build-in DHCP server.
NOTE : The PC’s IP Address must be in the same subnet as the Print Server’s IP Address
for the two devices to communicate. (For example, if MFP server’s IP Address
is 192.168.0.10, with a subnet mask of 255.255.255.0, then your computer’s IP
Address should be 192.168.0.x, where x is a value between 1-254, excluding
10.)