DSL-2740U Quick Installation Guide
4. IPv4 address assignment. By default, the built-in DHCP server of
the router assigns IPv4 addresses to the devices of the LAN. If you want
to manually assign IPv4 addresses, disable the DHCP server (click the
IPv4 tab and select the Disable value from the Mode of dynamic IP
address assignment drop-down list in the Dynamic IP Addresses
section).
5. IPv6 address assignment. By default, the devices of the LAN
automatically assign IPv6 addresses to themselves (the Stateless value
is selected from the Mode of dynamic IPv6 address assignment
drop-down list in the Dynamic IPv6 Addresses section on the IPv6
tab). If the devices of the LAN do not support IPv6 address
autoconfiguration, enable the built-in DHCPv6 server of the router (select
the Stateful value from the Mode of dynamic IPv6 address
assignment drop-down list). If you want to manually assign IPv6
addresses to devices of the LAN, select the Disable value from the
Mode of dynamic IPv6 address assignment drop-down list.
6. After specifying the needed parameters on the Connections Setup /
LAN page, click the APPLY button.
31
To Next Page
Loading...
Need help?
Data Transfer Rates
