............................................................................................................................................................................................................................................................
Install the CPEInstallation Guide
1-4
Issue 1 February 2011
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
4 Connect one end of the Category 5 UTP network cable to the Ethernet LAN port on the
CPE and the other end to the port of the network interface on the appropriate device, for
example a PC, Notebook and so on.
........................................................................................................................................................................................................................
5 If you need to change the configuration of the gateway, make sure that the Ethernet
adapter of your device is correctly configured for Static IP. For more details refer to
Appendix B TCP/IP configuration.
........................................................................................................................................................................................................................
6 Establish the first connection with your ISP. For information about how to configure an
internet connection, please consult your ISP.
........................................................................................................................................................
E ND OF STEPS
To Next Page
Loading...
Need help?
General
