EasyManua.ls Logo

D-Link DSR-250 - Configurable Port - WAN Option; WAN 3 (3 G) Configuration; Figure 25: Static Route Configuration Fields

D-Link DSR-250
233 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Unified Services Router User Manual
49
Figure 25: Static route configuration fields
3.6 Configurable Port - WAN Option
This router supports one of the physical ports to be configured as a secondary WAN
Ethernet port or a dedicated DMZ port. If the port is selected to be a secondary WAN
interface, all configuration pages relating to WAN2 are enabled.
3.7 WAN 3 (3G) Configuration
This router supports one of the physical ports WAN3 to be configured for 3G internet
access.
Setup > Internet Settings > WAN3 Setup
WAN3 configuration for the 3G USB modem is available only on WAN3 interface.
There are a few key elements of WAN 3 configuration.
Reconnect Mode: Select one of the following options
o Always On: The connection is always on. Username: Enter the username
required to log in to the ISP.
o On Demand: The connection is automatically ended if it is idle for a
specified number of minutes. Enter the number of minutes in the

Table of Contents

Other manuals for D-Link DSR-250

Related product manuals