EasyManua.ls Logo

D-Link DSR-250 - Chapter 4. Wireless Access Point Setup

D-Link DSR-250
233 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Unified Services Router User Manual
51
Figure 26: WAN3 configuration for 3G internet
3G WAN support is available on these dual WAN products: DSR-1000 and DSR-
1000N.
Cellular 3G internet access is available on WAN3 via a 3G USB modem for DSR-
1000 and DSR-1000N. The cellular ISP that provides the 3G data plan will provide
the authentication requirements to establish a connection. The dial Number and APN
are specific to the cellular carriers. Once the connection type settings are configured
and saved, navigate to the WAN status page (Setup > Internet Settings > WAN3
Status) and Enable the WAN3 link to establish the 3G connection.
3.8 WAN Port Settings
Advanced > Advanced Network > WAN Port Setup
The physical port settings for each WAN link can be defined here. If your ISP account
defines the WAN port speed or is associated with a MAC address, this information is
required by the router to ensure a smooth connection with the network.

Table of Contents

Other manuals for D-Link DSR-250

Related product manuals