42D-Link DWA-642 User Manual
Section 5 - Troubleshooting
Check that the Network Connection for the wireless client is configured properly. Select AP (Infrastructure) when
connecting to an access point and select Ad-Hoc mode when connecting without an access point. Double-click on the
WLAN icon in the taskbar > click on Configuration to change the settings for the wireless adapter.
If Security is enabled, make sure that the correct encryption keys are entered on both the DWA-642 and the access
point. Double-click on the WLAN icon in the taskbar > click Encryption. Check to see that the key selected is set to the
same key as other devices on the network.
To Next Page
Loading...
