EasyManuals Logo

D-Link DWL-6600AP Administrator's Guide

D-Link DWL-6600AP
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Unied Access Point Administrator’s Guide
Unied Access Point Administrator’s Guide
Page 87
January 2015
Section 7 - Maintaining the Access Point
Field Description
Remote Capture
Port
Specify the remote port to use as the destination for packet captures. (range 1 to 65530).
Table 50 - Remote Packet Capture
Packet Capture File Download
Packet Capture File Download allows you to download the capture le by TFTP to a congured TFTP server or by
HTTP(S) to a PC. The captured packets are stored in le /tmp/apcapture.pcap on the AP. A capture is automatically
stopped when the capture le download command is triggered.
Because the capture le is located in the RAM le system, it disappears if the AP is reset.
Figure 57 - Packet Capture File Download
The following table describes the elds to congure the packet capture status.
Field Description
Use TFTP to
download the
capture le
Select or clear this option to determine whether to use TFTP or HTTP(S) to download the
capture le:
•) To download the le by using TFTP, select this option and complete the additional
elds.
•) To download the le by using HTTP or HTTPS, clear this option and click Download to
browse to the location where the le is to be saved.
TFTP Server
Filename
When using TFTP to download the le, specify a name for the packet capture le, including
the .pcap le name extension and the path to the directory where you want to save the le.
Server IP When using TFTP to download the le, specify the IP address of the TFTP server.
Table 51 - Packet Capture File Download

Table of Contents

Other manuals for D-Link DWL-6600AP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DWL-6600AP and is the answer not in the manual?

D-Link DWL-6600AP Specifications

General IconGeneral
2.4 GHzYes
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate450 Mbit/s
Power consumption (typical)9.6 W
InternalNo
PlacementCeiling, Wall
CertificationFCC Class B, CE Class B, C-Tick
Product colorGray
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
WAN connectionEthernet (RJ-45)
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports2
Security algorithms64-bit WEP, 128-bit WEP, WPA, WPA2
Weight and Dimensions IconWeight and Dimensions
Depth77.5 mm
Width156 mm
Height- mm
Weight500 g

Related product manuals