45
Advanced NAT
Network Address Translation (NAT) is a technique which allows several
computers on a LAN to share an Internet connection. The computers
on the LAN use a "private" IP address range while the WAN port on the
DWR-923 is configured with a single "public" IP address.
Along with connection sharing, NAT also hides internal IP addresses
from computers on the Internet.
NAT: Select NAT if your ISP has assigned you only one IP address. The
computers that connect through the DWR-923 will need to be assigned
IP addresses from a private subnet (e.g. 192.168.10.0).
Bridge Mode: The DWR-923 in bridge mode can act as a bridge and
also filter/inspect packets. It has all the interfaces belonging to the
same LAN segment and you do not have to change other network
settings when you add a transparent device to the network. Select this
option to add your WAN interface to the LAN segment.
Click Apply to apply the changes. Or click Reset to undo your
configurations.
To Next Page
Loading...
