Technical Support Setup Procedure
5 Look for SSID field, remove the default Wi-Fi name (d-link or dlink-xxxx), and enter a
new one.
6 After making changes, Click Save & Apply
7 To Modify the Wireless Password (WPA Key), click on the ‘Wireless’ tab at the top of
the page then ‘Security’.
8 Within the Wireless Settings, you will find an option for security mode. Typically, you can
choose between WEP, WPA, WPA2, WPA3, or WPA2/WPA3-Mixed for Encryption.
9 Select the desired security mode (WPA2/WPA3-mixed is recommended for better
security)
10 Then look for Pre-Shared Key at the bottom of the page. Remove all the dots and enter
a new Wi-Fi password.
11 After making changes, Click Save & Apply
---END---
To Previous Page
Loading...
