HOW TO ACCESS THE ROUTER
4) If you have the computer with Wi-Fi
then, go to wireless utility to display
available Wireless networks & select
the Wi-Fi name of device. (Default
Wi-Fi name is dlink_DWR_113). By
default there is no security /
password for this network.
5) If you don’t have Wi-Fi enabled
computer then you can connect
the lan cable provided in the box
between any lan port of the router
and computer lan port.
3) Connect the power adaptor to
device and power on the device.
Power LED should be green.
2)
1)
Connect the Wi-Fi Antenna to
the router.
Unbox the router.
To Next Page
Loading...
