-12-
There will be three options to select from. Please select the appropriate
option that is used by your ISP.
Dynamic IP Address: (ex:
Cable users) Select this
option to obtain an IP address
automatically from your ISP.
Please see Dynamic IP
Address section.
Static IP Address: Select this
option to manually input the
IP address that your ISP
assigned to you. Please see
Static IP Address section.
PPP over Ethernet (PPPoE):
(ex: DSL users) Select this option if your ISP requires the use of PPPoE to
connect to their services. Please see PPPoE section.
Others (PPTP and BigPond Cable): Select this option if your ISP requires
the use of PPTP to connect to their services or your ISP is BigPond Cable.
Please see PPTP section, or follow BigPond Cable’s configuration guide.
Once you have made the appropriate selection, click Next.
Dynamic IP Address
If you selected Dynamic IP Address, you will see the following page.
If your ISP requires you to enter a
specific host name or specific
MAC address, please enter it in.
The CLONE MAC Address button
is used to copy the MAC address
of your Ethernet adapter to the
DI-604 WAN interface.
Click Next
To Next Page
Loading...
Need help?
General
