D-Link Express EtherNetwork DI-604 User Manual

-26-
HOME > DHCP
DHCP stands for Dynamic Host Control Protocol. The DI-604 has a built-in
DHCP server. The DHCP Server will automatically assign an IP address to
the computers on the LAN/private network. Be sure to set your computers
to be DHCP clients by setting their TCP/IP settings to “Obtain an IP
Address Automatically.” When you turn your computers on, they will
automatically load the proper TCP/IP settings provided by the DI-604. The
DHCP Server will automatically allocate an unused IP address from the IP
address pool to the requesting computer. You must specify the starting
and ending address of the IP address pool.
Starting IP Address: The starting IP address for the DHCP server’s IP
assignment.
Ending IP Address: The ending IP address for the DHCP server’s IP
assignment.
Lease Time: The length of time for the IP lease.

D-Link Express EtherNetwork DI-604 Specifications

General

Category	Wireless Router
Model	DI-604
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet
Standards	IEEE 802.3, IEEE 802.3u
WAN Ports Qty	1
LAN Ports Qty	4
Firewall	Yes
VPN Pass-through	Yes
Features	NAT support, DHCP support, DMZ port
Ports	5 x Ethernet 10/100 Mbps
Weight	0.75 lbs