D-Link Express EtherNetwork DI-604 User Manual

-39-
IP Address: Internet IP address of the computer that has access to the
Broadband Router. If the IP address is set to * (star). This allows any
Internet IP address to access the Broadband Router. It is not
recommended that you set the IP address to * (star), because this
allows any Internet IP address to access the Broadband Router,
which could result in a loss of security for your network. If you elect
to enable Remote Management, enter the IP Address of your remote
location.
Port: The port number used to access the Broadband Router. (Select from
the pull-down menu.)
Example: http://x.x.x.x:8080
where x.x.x.x is the WAN IP address of
the Broadband Router and 8080 is the port used for the
Web-Management interface.
TOOLS > TIME
Time
The system time is the time used by the DI-604 for scheduling services.
You can manually set the time or connect to a NTP (Network Time
Protocol) server. If an NTP server is set, you will only need to set the time

D-Link Express EtherNetwork DI-604 Specifications

General

Category	Wireless Router
Model	DI-604
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet
Standards	IEEE 802.3, IEEE 802.3u
WAN Ports Qty	1
LAN Ports Qty	4
Firewall	Yes
VPN Pass-through	Yes
Features	NAT support, DHCP support, DMZ port
Ports	5 x Ethernet 10/100 Mbps
Weight	0.75 lbs