D-Link Express EtherNetwork DI-604 User Manual

-44-
STATUS > DEVICE INFORMATION
This page displays the current information for the Broadband Router. It will
display the WAN, LAN, and MAC address information.
If your WAN connection is set up for Dynamic IP address, there will be a
Release button and Renew button. Use Release to disconnect from your
ISP and use Renew to connect to your ISP.
If your WAN connection is set up for PPPoE, there will be a Connect
button and Disconnect button. Use Disconnect to drop the PPPoE
connection and use Connect to establish the PPPoE connection.

D-Link Express EtherNetwork DI-604 Specifications

General

Category	Wireless Router
Model	DI-604
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet
Standards	IEEE 802.3, IEEE 802.3u
WAN Ports Qty	1
LAN Ports Qty	4
Firewall	Yes
VPN Pass-through	Yes
Features	NAT support, DHCP support, DMZ port
Ports	5 x Ethernet 10/100 Mbps
Weight	0.75 lbs