D-Link G416 User Manual

56D-Link G416 User Manual
Section 3 - Conguration
Guest Zone
Go to Settings > Wireless, then click the Guest Zone tab to congure your guest Wi-Fi.
The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These
zones will be separate from your main wireless network. You may congure dierent zones for the 2.4 GHz and 5 GHz
wireless bands.
Click Save at any time to save the changes you have made on this page.
If Smart Connect is
Enabled in the previous Wireless settings, congure the following for both
radio frequencies. If it is
Disabled, congure the following for 2.4GHz and 5GHz individually.
Wireless
Status Enable or disable the Guest Zone feature. The status is disabled
by default.
Wireless Name (SSID) Create a name for your wireless network using up to 32
characters.
Password Create a password to use for wireless security. Your password
must be between 8-63 characters in length.
Schedule Select the time during which the wireless network will be
available. The schedule may be set to Always Enable or you
can add your own schedule.
To add a schedule:
Each box represents half an hour, with the clock time (0~23) at
the top of each column. To add a time period to the schedule,
simply click on the start time and drag to the end time. You
can add multiple days and multiple periods per day to the
schedule.

D-Link G416 Specifications

General

Device Type	Wireless Router
Antenna	4 x External Antennas
Wireless Technology	Wi-Fi 6
Frequency Band	Dual-band (2.4 GHz & 5 GHz)
WAN Interface	1 x Gigabit Ethernet
Interface	Gigabit Ethernet
LAN Ports	4
Ports	1 x Gigabit WAN, 4 x Gigabit LAN
Security	WPA3
Wireless Standards	IEEE 802.11ax/ac/n/g/b/a