Need help?Do you have a question about the D-Link G413K and is the answer not in the manual?
General| Brand | D-Link |
|---|---|
| Model | G413K |
| Category | Network Router |
| Language | English |
Lists revisions and dates of manual updates.
Lists registered trademarks of D-Link and other companies.
Lists the items included in the router package.
Details the requirements for internet service provider connection.
Specifies computer and browser requirements for configuration.
Details dual-band capability and speeds up to 1200 Mbps.
Confirms compatibility with older wireless standards.
Describes content filtering and scheduling capabilities.
Explains support for IPsec and PPTP VPN sessions.
Highlights the easy-to-use web-based interface for configuration.
Identifies and describes the ports and buttons on the router's back.
Explains how to insert a SIM card for mobile connection.
Provides prerequisites and initial setup advice before installation.
Guides users through the initial internet connection setup process.
Instructs on selecting the WAN interface (3G/4G or ETH).
Covers auto-detecting 3G/4G or configuring PPPoE/DHCP for fibre.
Details entering PPPoE username and password for internet connection.
Explains testing the PPPoE connection and troubleshooting.
Guides on modifying Wi-Fi SSID and Preshare Key for 2.4GHz and 5GHz bands.
Covers changing the web UI login credentials (AdminName/AdminPassword).
Details entering Site Username, Password, and LAN IP/Netmask for VPN.
Allows review and application of all configuration settings.
Explains how to access the router's web interface using IP address and credentials.
Configures IPv4 Local Area Network settings like IP address and DHCP.
Allows modification of WAN profile settings and connection types.
Details DHCP, PPPoE, and Static IP configuration options.
Explains how to configure static IP address, subnet mask, gateway, and DNS.
Configures PPTP VPN connection parameters like server, username, and password.
Configures L2TP VPN connection parameters like server, username, and password.
Configures GRE tunnel parameters including IP addresses and NAT.
Configures parameters for the VPN Lite feature.
Configures IPv6 internet connection settings like origin type and address mode.
Details 6RD IPv6 prefix, WAN IPv4, and relay IP address settings.
Explains options for automatically or manually attaining AFTR.
Configures IPv6 LAN settings, DHCPv6 server, and RADVD.
Configures prefix delegation, valid lifetime, and preferred lifetime.
Enables IPv6 tunneling over IPv4.
Configures VLAN ID and bridges interfaces/ports for VLAN passthrough.
Selects the WAN connection to use as the default gateway route.
Configures static routes for directing traffic to specific clients or locations.
Configures ping check parameters for network availability testing.
Configures LTE/3G WAN profile, username, password, APN, and PIN.
Allows configuration of the SIM card PIN state (lock/unlock).
Page for sending SMS messages through the router.
Lists received SMS messages and allows creation and deletion.
Lists sent SMS messages and allows deletion.
Configures where SMS messages are stored (SIM card or module).
Allows sending commands to the network for services.
Used to get the result of AT commands executed on the router.
Monitors real-time data usage and sets data usage allowance alerts.
Configures basic wireless parameters for the 2.4GHz band.
Enables the Wi-Fi repeater function to extend wireless networks.
Sets up wireless security using WEP/WPA/WPA2/WPA3 encryption.
Manages access to the router based on MAC addresses (Whitelist/Blacklist).
Scans the wireless network and allows manual connection to found routers.
Configures Wi-Fi Protected Setup (WPS) for easy client connection.
Sets up wireless schedule rules for enabling/disabling Wi-Fi.
Configures basic wireless parameters for the 5GHz band.
Sets up wireless security using WEP/WPA/WPA2/WPA3 encryption for 5GHz.
Manages access to the router based on MAC addresses for 5GHz.
Scans the 5GHz wireless network and allows manual connection.
Configures WPS for the 5GHz band for easy client connection.
Sets up wireless schedule rules for the 5GHz band.
Enables DMZ, UPnP, IGMP Proxy, Ping Access, Web Server Access, and VPN passthrough.
Restricts data packets by enabling port filtering for IPv4/IPv6.
Restricts data packets by enabling IP filtering for IPv4/IPv6.
Blocks or allows specific devices using their MAC addresses (Whitelist/Blacklist).
Redirects common network services to a specific machine behind NAT.
Denies LAN users access to the internet by blocking specified URLs.
Prioritizes network traffic for improved online gaming and other applications.
Sets the router's system time by synchronizing with an NTP server.
Configures Dynamic DNS service for a static internet domain name.
Protects against denial-of-service attacks by configuring prevention measures.
Configures remote log server and displays system logs.
Sets the account password for accessing the router's web server.
Provides diagnostics for ping connection testing.
Provides diagnostics for traceroute connection testing.
Saves, reloads, or resets router configuration settings to factory default.
Configures automatic router reboot at specified intervals or times.
Allows upgrading the router firmware to a new version.
Logs out of the router's web GUI.
Step-by-step guide to connect a Windows 10 client wirelessly.
Guide to connect a Windows 8 client wirelessly to the router.
Steps to connect a Windows 7 client wirelessly to the router.
Configures the WPS feature using Windows 7 for client connection.
Troubleshooting steps for accessing the router's web interface.
Procedure for resetting the router if the password is forgotten.
Troubleshooting tips for site connectivity and email issues.
Instructions for assigning a static IP address to a network adapter.
To Next Page