D-Link G413K - Step 6: Set Web UI Credentials; Step 7: Configure VPN Lite Settings

15
Step 6
In this step you can enter the change the web UI credentials. (The
details used to log into the settings page of your router on 10.0.0.2)
AdminName: The username to log in to the web UI.
AdminPassword: Enter the password here for logging into the web UI.
AdminPassword: Enter the password for logging in to the web UI again
to confirm.
Note: Password cannot contain a space.
Click Back to go back to the pervious page, click Skip to skip this
configuration (not recommended for security purposes) or click Next to
continue to Step 7.
Step 7
In this step you can enter the Site Username, Site Password, Confirm Site
Password and Site LAN IP/Netmask to connect to Telkom VPN lite
Site Username: The site username.
Site Password: Enter the site password here.
Confirm Site Password: Enter the site password again to confirm.
Site LAN IP/ Netmask: Enter the LAN IP or Netmask for the site here.
Note: Password cannot contain a space.
Click Back to go back to the pervious page or click Next to continue to Step 8.