8
Installation
This section will walk you through the installation process.
Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, attic, or garage.
Note: This installation section is written for users who are setting up their home Internet service with the G413K LTE CAT6 Fibre Wi-Fi AC1200 Gigabit
Router for the first time. If you are replacing an existing modem and/or router, you may need to modify these steps.
Before you begin
• Make sure to have your active account with an Internet Service Provider using one of the following connection types either:
• A Mobile connection using a SIM card
• Fibre service information provided by your Internet Service Provider handy. This information is likely to include your Fibre account's
Username and Password. Your ISP may also supply you with additional WAN configuration settings which are necessary to establish a
connection. This information may include the connection type (DHCP IP, Static IP, PPPoE, or PPPoA) and/or ATM PVC details.
• If you are connecting a considerable amount of networking equipment, it may be a good idea to take the time to label each cable or take a
picture of your existing setup before making any changes.
• We suggest setting up your G413K from a single device and verifying that it is connected to the Internet before connecting additional devices.
To Next Page
Loading...
Need help?
General
