D-Link G413K - Hardware Overview; Back Panel Ports and Buttons

5
Hardware Overview
Back Panel
1
1.
Power Button
Press to switch router ON/OFF
2.
Power Connector
Connector for the supplied power adapter.
3.
WAN Port
Connects to Ethernet WAN devices.
4.
Ethernet Ports
Connects to Ethernet devices such as computers.
5.
WPS button
Press and hold for 5 seconds to activate WPS function
6.
Wi-Fi on/off button
Press and hold for 5 seconds to turn off your 2.4G & 5.8G Wi-Fi, Press and hold for 5 seconds again to
switch them back on, please wait for 30 seconds before the Wi-Fi goes on/off
7.
Reset hole
Press and hold for 15 seconds to factory reset your router