48
Wireless
2.4Ghz Basic Settings
You can config the parameters for wireless LAN clients which may connect to your Router. Here you may change wireless encryption settings
as well as wireless network parameters.
Disable Wireless LAN Interface: Enable if you want to turn off the
2.4GHz Wi-Fi.
Country or Region: Select your Country.
Band: Select the band of your 2.4Ghz Wi-Fi.
Mode: Select the mode of your 2.4Ghz Wi-Fi, Client or AP (Access
Point).
SSID: Change the Wi-Fi name that appears on end devices.
Channel Width: Select the bandwidth of your 2.4Ghz Wi-Fi, 20MHz
or 40MHz.
Control Sideband: Defines the sideband of the channel of your
2.4Ghz Wi-Fi.
Channel Number: Select the channel of your 2.4GHz Wi-Fi.
Auto Channel Timer: Select your Channel timer between 1-999
hours.
BroadcastSSID: Turn your SSID off or on for the 2.4Ghz Wi-Fi.
WMM: Prioritizes network traffic to improve the performance of a
variety of network applications.
Data Rate: Select the data rate of your 2.4Ghz Wi-Fi.
Associated Clients: Shows an active list of all clients contacted to
the 2.4Ghz Wi-Fi.
To Next Page
Loading...
