Name: D-Link G416
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

75D-Link G416 User Manual

Section 3 - Conguration

If you click

Edit or Add Rule, the following options will appear:

Name Enter a name for the rule.

Source IP Address

Range

Enter the source IP address range (e.g. 1.1.1.1-1.1.1.2 for IPv4

or 2001::1-2001::2 for IPv6) that the rule will apply to. Using

the drop-down menu, specify whether it is a WAN or LAN IP

address. Both a single IP address and a range of IP addresses

can be entered.

Destination IP Address

Range

Enter the destination IP address range (e.g. 1.1.1.1-1.1.1.2

for IPv4 or 2001::1-2001::2 for IPv6) that the rule will apply

to. Using the drop-down menu, specify whether it is a WAN

or LAN IP address. Both a single IP address and a range of IP

addresses can be entered.

Protocol & Port Range Select the protocol of the trac to allow or deny (Any, TCP, or

UDP) and then enter the range of ports (e.g. 21-23) that the

rule will apply to. Select Any to allow/deny all types of trac

regardless of the port number.

Schedule Use the drop-down menu to select the time schedule during

which the rule will be active. The schedule may be set to

Always Enable, or you can create your own schedules in the

Schedules section. Refer to Management > Time & Schedule

- Schedule on page 86 for more information.

A maximum of 24 rules can be dened.

Questions and Answers:

Need help?

Do you have a question about the D-Link G416 and is the answer not in the manual?

D-Link G416 Specifications

General