D-Link GO-RT-N300 - Product Overview; Package Contents

GO-RT-N300
5
ENGLISH
PRODUCT SET-UP
EASY SETUP WIZARD
Step 1
Position your router close to your modem and the computer that is
already online. Place this router in an open area of your intended
work area for better wireless coverage.
ADVANCED SET-UP (ACCESS VIA IP ADDRESS)
To congure GO-RT-N300 manually connect your computer to the GO-RT-N300 using the ethernet
cable provided. Then connect the power cable on the GO-RT-N300. The power light will display as
solid green. Then simply open a browser window and enter the IP address in the browser address
eld:
IP ADDRESS: http://192.168.0.1
USERNAME: Admin
PASSWORD: [blank]
Step 4
From the computer you connected to the router, open a web browser
and enter "http://192.168.0.1". Then, press Enter and you will be
directed to the D-Link Setup. Wizard page and follow the on-screen
instructions to congure your D-Link router.
Step 3
Connect the supplied power adapter into the power port on the back
of the router and then plug into a power outlet or surge protector.
Verify the power light is lit.
Step 2
Unplug the Ethernet cable from your modem that is connected to
your computer. Plug it into the black port labled 1 on the back of
your router. The router is now connected to your computer.
Plug one end of the included Ethernet cable that came with your
router into the yellow port labeled INTERNET on the back of the
router. Plug the other end of this cable into the Ethernet port on your
modem.
Modem
Router
PC
Router
PC
Modem
Router
PC
Modem
Internet
Save