Need help?Do you have a question about the D-Link GO-RT-N300 and is the answer not in the manual?
Wireless Signal Rates| IEEE 802.11n 20MHz channel | 150 Mbps (max) |
|---|---|
| IEEE 802.11n 40MHz channel | 300 Mbps (max) |
| IEEE 802.11g rates | 54 Mbps - 48 Mbps - 36 Mbps - 24 Mbps - 18 Mbps - 12 Mbps - 11 Mbps - 9 Mbps - 6 Mbps |
Operating Environment| operating temperature | 0 °C to 40 °C (32 °F to 104 °F) |
|---|---|
| storage temperature | -20 °C to 65 °C (-4 °F to 149 °F) |
| humidity | 10% minimum to 95% maximum (non-condensing) |
Dimensions| length | 160 mm (6.3 inches) |
|---|---|
| width | 120 mm (4.72 inches) |
| height | 59 mm (2.32 inches) |
Explains how to access the router's web interface for configuration settings.
Details the setup wizard for configuring WAN network connections and basic settings.
Covers configuration of the router's local IP settings and DHCP server.
Manual configuration for WAN connection types like DHCP, PPPoE, and Static IP.
Configuration of wireless network parameters like SSID, channel, band width, and transmission rate.
Covers WEP security settings, including authentication type and encryption strength.
Configuration for WPA/WPA2 security, including pre-shared key for network protection.
Guides on setting up Wi-Fi Protected Setup using Push-Button or PIN methods.
Enabling wireless access control to allow or deny devices based on MAC address.
Procedure for upgrading the router's firmware using a file from the local hard drive.
Solutions for issues accessing the router's web interface, including browser and connectivity checks.
Procedure for resetting the router to factory defaults if the admin password is forgotten.
To Next Page
