D-Link GO-RT-N300 User Manual

25D-Link GO-RT-N300 User Manual
Section 3 - Conguration
Wireless Security
Wireless security helps to prevent unauthorized users from accessing your wireless network, or seeing data being passed
between the router and wireless clients. The GO-RT-N300 supports two popular wireless security protocols, you should select
a protocol based on the wireless clients which will be accessing your network.
Wired Equivalent Privacy (WEP) - This is an older form of wireless security and should only be used if your wireless clients do
not support the newer WPA or WPA2 protocols.
Select WEP from the drop-down menu.
Select either Automatic or Shared Key as the
authentication type.
Select the encryption strength from the drop-down menu.
64-bit - A 64-bit key comprises a string of 10 hexadecimal
characters, or 5 ASCII characters.
128-bit - A 128-bit key comprises a string of 26
hexadecimal characters, or 13 ASCII characters.
You can predetermine up to 4 WEP keys. Select the WEP
key you wish to use by clicking on the radio buttons next
to the keys. Select whether you wish to use HEX or ASCII
characters in your key using the drop-down menu. Enter
the desired key in the eld provided.
Click Apply to save the current settings.
Security
Options:
Authentication
Type:
Encryption
Strength:
Key 1-4:

D-Link GO-RT-N300 Specifications

Wireless Signal Rates

IEEE 802.11n 20MHz channel	150 Mbps (max)
IEEE 802.11n 40MHz channel	300 Mbps (max)
IEEE 802.11g rates	54 Mbps - 48 Mbps - 36 Mbps - 24 Mbps - 18 Mbps - 12 Mbps - 11 Mbps - 9 Mbps - 6 Mbps

Operating Environment

operating temperature	0 °C to 40 °C (32 °F to 104 °F)
storage temperature	-20 °C to 65 °C (-4 °F to 149 °F)
humidity	10% minimum to 95% maximum (non-condensing)

Dimensions

length	160 mm (6.3 inches)
width	120 mm (4.72 inches)
height	59 mm (2.32 inches)