D-Link GO-RT-N300 User Manual

31D-Link GO-RT-N300 User Manual
Section 3 - Conguration
Enable wireless on your network.
Click the Site Survey button to enable the router to
search for nearby wireless networks. This will take
about 30 seconds.
Repeater Enabled:
SSID of AP:
Wireless Repeater
A list of wireless networks that have been found will then appear. Select a network and click the Next button to move to the
next step.
This page allows you to configure wireless repeater settings for the GO-RT-N300.
GO-RT-N300
GO-RT-N300

D-Link GO-RT-N300 Specifications

Wireless Signal Rates

IEEE 802.11n 20MHz channel	150 Mbps (max)
IEEE 802.11n 40MHz channel	300 Mbps (max)
IEEE 802.11g rates	54 Mbps - 48 Mbps - 36 Mbps - 24 Mbps - 18 Mbps - 12 Mbps - 11 Mbps - 9 Mbps - 6 Mbps

Operating Environment

operating temperature	0 °C to 40 °C (32 °F to 104 °F)
storage temperature	-20 °C to 65 °C (-4 °F to 149 °F)
humidity	10% minimum to 95% maximum (non-condensing)

Dimensions

length	160 mm (6.3 inches)
width	120 mm (4.72 inches)
height	59 mm (2.32 inches)