D-Link GO-RT-N300 User Manual

47D-Link GO-RT-N300 User Manual
Section 3 - Conguration
Time and Date
Enter the correct year, month, day, and time.
Enter the correct year, month, day, and time.
Select the daylight saving offset from the drop-down
menu to have the router adjust the time to reflect the
starting or finishing of daylight saving in your region.
This adjustment should be made manually each time
daylight saving time begins or ends.
Click the Apply Changes button to save the current
configuration.
Network Time Protocol (NTP) automatically synchronizes
your router’s time and date settings with an Internet-
based time server.
Select Enable to enable the NTP server.
Enter the name of the NTP server.
Enter the name of the second NTP server.
Enter the time period that you want the NTP server to
synchronize time with the devices on the network. The
default value is one hour.
Select the time zone you are in from the pulldown menu.
This shows the current GMT (Greenwich Mean Time) time.
System Time:
Daylight Saving
Offset:
State:
Server:
Server2:
Interval:
Time Zone:
GMT Time:
This page allows you to edit the system time and Network Time Protocol (NTP). You can configure, update, and maintain the
correct time on the system clock, and configure Daylight Saving.
Click the Apply Changes button to save any changes made. To start the NTP, click the Get GMT Time button to obtain the GMT
time.
GO-RT-N300

D-Link GO-RT-N300 Specifications

Wireless Signal Rates

IEEE 802.11n 20MHz channel	150 Mbps (max)
IEEE 802.11n 40MHz channel	300 Mbps (max)
IEEE 802.11g rates	54 Mbps - 48 Mbps - 36 Mbps - 24 Mbps - 18 Mbps - 12 Mbps - 11 Mbps - 9 Mbps - 6 Mbps

Operating Environment

operating temperature	0 °C to 40 °C (32 °F to 104 °F)
storage temperature	-20 °C to 65 °C (-4 °F to 149 °F)
humidity	10% minimum to 95% maximum (non-condensing)

Dimensions

length	160 mm (6.3 inches)
width	120 mm (4.72 inches)
height	59 mm (2.32 inches)